Navcom LAND-PAK Rev.E User Manual

Browse online or download User Manual for Equipment Navcom LAND-PAK Rev.E. NavCom LAND-PAK Rev.E User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 156
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews

Summary of Contents

Page 1 - LAND-PAK™

LAND-PAK™ User Guide NavCom Technology, Inc. 20780 Madrona Avenue Torrance, California 90503 USA Tel: +1 310.381.2000 Fax: +1 310.381.2001 s

Page 2

LAND-PAK™ User Guide – Rev. E viii Notices LAND-PAK™ User Guide PN 96-310038-3001 Rev. E Aug, 2014 Serial Number: Date Delivered: Purchased F

Page 3 - Table of Contents

LAND-PAK™ User Guide – Rev. E 5-98 RTK Fixed Tolerance Perform these steps to set the RTK Fixed tolerance parameters: 1. Log on to FieldGenius and se

Page 4

LAND-PAK™ User Guide – Rev. E 5-99 Figure 58: GNSS Profile/Tolerance Setting [RTK Fixed] Figure 59: Tolerance 3/RTK Fixed

Page 5

LAND-PAK™ User Guide – Rev. E 5-100 Set the Active Tolerance To set a tolerance as the active tolerance, perform these steps: 1. Open FieldGenius and

Page 6 - List of Figures

LAND-PAK™ User Guide – Rev. E 5-101 Figure 61: Select Tolerance

Page 8

LAND-PAK™ User Guide – Rev. E 6-103 Chapter 6 ... Equipment Maintenance Users must be familiar with the use of portable GPS equipment, radio

Page 9 - List of Tables

LAND-PAK™ User Guide – Rev. E 6-104 Safety First The owner of the LAND-PAK must ensure that all users are properly trained prior to using the equipmen

Page 10 - Notices

LAND-PAK™ User Guide – Rev. E A-105 A ... Base Station UHF Boost Radio The radio connects to the SF-3040 Com 2 port with the supplied

Page 11

LAND-PAK™ User Guide – Rev. E A-106 Table 10: LAND-PAK Base Station UHF Amplifier (Optional) (PN 92-310460-3001LF) Item Qty Part Number EPIC 35W IP67

Page 12

LAND-PAK™ User Guide – Rev. E A-107  LED Indicators The LED indicators provide a quick status view of both the radio channel and the serial inte

Page 13

LAND-PAK™ User Guide – Rev. E ix FCC Notice NavCom-manufactured products comply with Part 15 of the FCC Rules. Operation is subject to the following

Page 14 - Revision History

LAND-PAK™ User Guide – Rev. E A-108 Soft Keys Figure 63: Radio Modem Soft Keys By using the four soft keys below the LCD display, all configurable se

Page 15

LAND-PAK™ User Guide – Rev. E A-109 Priority RX/TX Set the radio priority is TX. Forward Error Correction (FEC) and Error Checking FEC is disabled

Page 16 - Use of This Document

LAND-PAK™ User Guide – Rev. E A-110 installation surface will be subjected to vibration.  Data Transfer Mode In data transfer mode, which appears at

Page 17

LAND-PAK™ User Guide – Rev. E A-111 RF Frequency Configuration Set the radio modem only to a licensed frequency. It must comply with local regulat

Page 18

LAND-PAK™ User Guide – Rev. E A-112 b. Press the up or down arrow soft key to change the value of the digit, if needed. c. Repeat steps a and b, ab

Page 19 - Related Standards

LAND-PAK™ User Guide – Rev. E A-113 RF Power Output 1. Press the down arrow soft key to move the cursor down the main menu to Radio settings (see F

Page 20

LAND-PAK™ User Guide – Rev. E A-114  3ASd Epic radio modem: The RF power output options are 1, 2, 5, or 10 watts. The 10 watt setting provides the m

Page 21

LAND-PAK™ User Guide – Rev. E A-115 3. Press the down arrow soft key to move the cursor down the main menu to Sig. Threshold. 4. Press the Change

Page 22 - Unique Features

LAND-PAK™ User Guide – Rev. E A-116 4. Press the Back soft key to return to the main menu. Serial Port Settings 1. Press the down arrow soft key to

Page 23

LAND-PAK™ User Guide – Rev. E A-117 Figure 77: Baud Rate Setting Change 6. Press the Set soft key to set the baud rate to 38400 bit/s. The previou

Page 24 - LAND-PAK Configurations

LAND-PAK™ User Guide – Rev. E x In no event will NavCom Technology, Inc. be liable for direct, indirect, special, incidental or consequential damages

Page 25

LAND-PAK™ User Guide – Rev. E A-118 that will communicate with each other. If the transmitting radio modem and the receiving radio modem have differen

Page 26

LAND-PAK™ User Guide – Rev. E A-119 Figure 80: SL-Commands and Priority b. Press the down arrow soft key to move the cursor down the submenu to Pr

Page 27

LAND-PAK™ User Guide – Rev. E A-120 This page is left blank intentionally.

Page 28

LAND-PAK™ User Guide – Rev. E B-121 B ... UHF Boost Radio Setup Figure 82: Mounting the Radio Antenna Bracket Refer to Fi

Page 29

LAND-PAK™ User Guide – Rev. E B-122 Over-tightening the knob may cause damage to the tripod leg finish. 10. Level the bracket by eye. Loosen the kno

Page 30

LAND-PAK™ User Guide – Rev. E B-123 radio modem, and avoids radiation hazard. To avoid radiation hazard when performing a survey, users and bystan

Page 31

LAND-PAK™ User Guide – Rev. E B-124 Figure 85: Mounting the Cable to the Radio 18. Connect the serial cable: a. Connect the LEMO 8-Pin end of the c

Page 32

LAND-PAK™ User Guide – Rev. E C-125 C ... Handheld Device Specifications Table 14: Nautiz X7 Handheld Device Specifications Specificatio

Page 33

LAND-PAK™ User Guide – Rev. E C-126 Specification Description Display 480x640 pixel anti-glare 3.5" VGA resolution, sunlight-readable, 262K color

Page 34

LAND-PAK™ User Guide – Rev. E C-127 Table 15: Archer 2 Specifications Specification Description Size (LxWxH) 184mm (7.25") x 91mm (3.6") x

Page 35

LAND-PAK™ User Guide – Rev. E xi terms and conditions may apply; for full details, contact a NavCom dealer. For further details on the StarFire™ Sig

Page 36

LAND-PAK™ User Guide – Rev. E C-128 Specification Description enabled; USB host, USB client; 12, 24VDC input, 10-36V unregulated; 3.5mm audio jack; I/

Page 37

LAND-PAK™ User Guide – Rev. E D-129 D ... StarFire End-User Lifetime License THIS AGREEMENT IS A LEGAL AGREEMENT BETWEEN YOU, THE USER, AND N

Page 38

LAND-PAK™ User Guide – Rev. E D-130 StarFire Quality of Service Specification without notice to the User. Navcom further reserves the right to

Page 39

LAND-PAK™ User Guide – Rev. E D-131 4. Period of Validity This License holds a Life Time Period of Validity. “Life Time Period of Valid

Page 40 - (PN 92-310458-3001LF)

LAND-PAK™ User Guide – Rev. E D-132 (b) you must not use or reproduce those intellectual property rights except to the extent necessary

Page 41

LAND-PAK™ User Guide – Rev. E D-133 9. Disclaimer of Warranty NAVCOM DISCLAIMS ALL WARRANTIES (WHETHER EXPRESS OR IMPLIED), ANY FITNESS FOR A

Page 42

LAND-PAK™ User Guide – Rev. E D-134 Navcom determines there is abuse, fraud or unlawful use of the StarFire signal, Navcom may terminate the License.

Page 43 - (PN 92-310459-3001LF)

LAND-PAK™ User Guide – Rev. E D-135 that it is User’s responsibility to periodically access the website for updates. 16. Indemnification Y

Page 44

LAND-PAK™ User Guide – Rev. E D-136 (a) countries subject to comprehensive economic embargo sanctions or designated as terrorist-supporting

Page 45

LAND-PAK™ User Guide – Rev. E D-137 22. Governing Law The License is governed by the laws of the State of California, and the exclusive ve

Page 46

LAND-PAK™ User Guide – Rev. E xii Revision History Rev E – Aug 2014 Chapter 1: Changed battery specifications in Table 2 and 3. Added note regardi

Page 47

LAND-PAK™ User Guide – Rev. E E-138 E ... RoHS Certification RoHS (Restriction of Use of Hazardous Substances) r

Page 48 - Release

LAND-PAK™ User Guide – Rev. E E-139 92-310503-3001LF Part Name Toxic or hazardous substances and elements Lead (Pb) Mercury (Hg) Cadmium (Cd) Hexava

Page 49 - Nautiz X7 Battery Pack

LAND-PAK™ User Guide – Rev. E E-140 92-310459-3001LF Part Name Toxic or hazardous substances and elements Lead (Pb) Mercury (Hg) Cadmium (Cd) Hexavale

Page 50

LAND-PAK™ User Guide – Rev. E E-141 92-310458-3001LF Part Name Toxic or hazardous substances and elements Lead (Pb) Mercury (Hg) Cadmium (Cd) Hexava

Page 51

LAND-PAK™ User Guide – Rev. E E-142 92-310413-3002LF Part Name Toxic or hazardous substances and elements Lead (Pb) Mercury (Hg) Cadmium (Cd) Hexavale

Page 52

LAND-PAK™ User Guide – Rev. E E-143 92-310418-3001LF Part Name Toxic or hazardous substances and elements Lead (Pb) Mercury (Hg) Cadmium (Cd) Hexava

Page 53 - Nautiz X7 Configuration

LAND-PAK™ User Guide – Rev. E E-144 92-310415-3001LF Part Name Toxic or hazardous substances and elements Lead (Pb) Mercury (Hg) Cadmium (Cd) Hexavale

Page 54

LAND-PAK™ User Guide – Rev. E E-145 “X” indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials for

Page 55

LAND-PAK™ User Guide – Rev. E E-146 RoHS 认证 说明 RoHS(危险物质的使用限制)法规限制或禁止在新的电气和电子设备中使用特定物质,这些物质包括铅、镉、多溴二苯醚 (PBB)、汞、六价铬和多溴代二苯醚 (PBDE) 阻燃剂。 对于镉和六价铬,在原材料均匀级别

Page 56 - Radio Overview

LAND-PAK™ User Guide – Rev. E E-147 表17: 按部件号列出的有毒或危险物质或原件 92-310501-3001LF 部件号 有毒或危险物质和元件 铅 (Pb) 汞 (Hg) 镉 (Cd) 六价铬 (Cr(VI)) 多溴二苯醚 (PBB) 多溴代二苯醚 (

Page 57 - Technical Specifications

LAND-PAK™ User Guide – Rev. E xiii Eliminated all references to Galileo, E1 and E2A. Chapter 5: Added FieldGenius instructions for StarFire Over IP.

Page 58

LAND-PAK™ User Guide – Rev. E E-148 92-210206-3001LF 部件号 有毒或危险物质和元件 铅 (Pb) 汞 (Hg) 镉 (Cd) 六价铬 (Cr(VI)) 多溴二苯醚 (PBB) 多溴代二苯醚 (PBDE) PCBA X O O O O O 收音

Page 59

LAND-PAK™ User Guide – Rev. E E-149 衬垫 O O O O O O 电池 X O O O O O 电池充电器 O O O O O O USB 闪存驱动器 O O O O O O 92-310520-3001LF 部件号 有毒或危险物质和元件 铅 (Pb) 汞

Page 60 - Base Station Test Setup

LAND-PAK™ User Guide – Rev. E E-150 三脚架/ 柱杆 O O O O O O 测量仪表 O O O O O O 便携包 O O O O O O PDA O O O O O O 减震台 O O O O O O 天线 X O O O O O 线缆 X O O O O O

Page 61

LAND-PAK™ User Guide – Rev. E E-151 92-310413-3002LF 部件号 有毒或危险物质和元件 铅 (Pb) 汞 (Hg) 镉 (Cd) 六价铬 (Cr(VI)) 多溴二苯醚 (PBB) 多溴代二苯醚 (PBDE) PCBA X O O O O O

Page 62

LAND-PAK™ User Guide – Rev. E E-152 92-310418-3001LF 部件号 有毒或危险物质和元件 铅 (Pb) 汞 (Hg) 镉 (Cd) 六价铬 (Cr(VI)) 多溴二苯醚 (PBB) 多溴代二苯醚 (PBDE) PCBA X O O O O O 开

Page 63 - Rover Test Setup

LAND-PAK™ User Guide – Rev. E E-153 92-310415-3001LF 部件号 有毒或危险物质和元件 铅 (Pb) 汞 (Hg) 镉 (Cd) 六价铬 (Cr(VI)) 多溴二苯醚 (PBB) 多溴代二苯醚 (PBDE) 电源适配器 O O O O O

Page 64

LAND-PAK™ User Guide – Rev. E E-154 支架 O O O O O O  “O” 表示本部件中所有均匀物质中的有毒物质或危险物质含量均低于 SJ/T11363-2006(中华人民共和国电子工业标准)的限制要求。 “X” 表示本部件中至少有一项均匀物质中的有毒物质或

Page 65

LAND-PAK™ User Guide – Rev. E xiv Use of This Document This User Guide is intended to be used by someone familiar with the concepts of GPS and satelli

Page 66

LAND-PAK™ User Guide – Rev. E xv LAND-PAK™ Quick Start Guide PN 96-310039-3001 Provides steps to configure and operate the LAND-PAK™ with minimal s

Page 67 - Summary

LAND-PAK™ User Guide – Rev. E xvi Field Genius User Guide Describes the operation and use of NavCom’s modified version of MicroSurvey Field Genius dat

Page 68 - Installation

LAND-PAK™ User Guide – Rev. E xvii Related Standards ICD-GPS-200 NAVSTAR GPS Space Segment / Navigation User Interfaces Standard; ARINC Research Cor

Page 69

LAND-PAK™ User Guide – Rev. D This page is left blank intentionally.

Page 70

LAND-PAK™ User Guide – Rev. E xviii QZSS Quasi Zenith Satellite System; Japan Aerospace Exploration Agency (JAXA), 7-44-1 Jindaiji Higashi-machi, Cho

Page 71

LAND-PAK™ User Guide – Rev. E xix MSAS (MTSAT Satellite-based Augmentation System) Japan Civil Aviation Bureau; Ministry of Transport. Kasumigaseki

Page 72 - Registration

LAND-PAK™ User Guide – Rev. E 1-20 Chapter 1 ... Introduction This manual describes the components of the LAND-PAK™ sys

Page 73

LAND-PAK™ User Guide – Rev. E 1-21 RTCM 1000-series messages. The navigation algorithms are designed to support single-base correction configuratio

Page 74

LAND-PAK™ User Guide – Rev. E 1-22 few seconds, resulting in user down-time and reduced productivity. With RTK Extend™, a NavCom StarFire™ receiver op

Page 75

LAND-PAK™ User Guide – Rev. E 1-23  NavCom handheld controller running Windows Mobile 6 w/ internal GPRS cell modem and Bluetooth  NavCom FieldG

Page 76

LAND-PAK™ User Guide – Rev. E 1-24 formats. It is capable of RTK/UltraRTK™, RTCM 2.3 and 3.0 (code and phase), RTCM 3.1, types 1001-1012, 1019, 1020,

Page 77 - Collector

LAND-PAK™ User Guide – Rev. E 1-25 The all-in-one housing incorporates our compact GNSS antenna with excellent tracking performance and a stable pha

Page 78

LAND-PAK™ User Guide – Rev. E 1-26  Refer to the supplied SF-3040 GNSS Product User Guide for further information about the SF-3040 ports. The SF-304

Page 79

LAND-PAK™ User Guide – Rev. E 1-27  User Interface The LAND-PAK 1W radio modems are configurable via FieldGenius software installed on the Nautiz

Page 80

LAND-PAK™ User Guide – Rev. E i Table of Contents Table of Contents ... i List of Figures ...

Page 81

LAND-PAK™ User Guide – Rev. E 1-28  User Interface Figure 2: Nautiz X7 Handheld Device Figure 3: Nautiz X7 Keypad, Detail

Page 82 - View StarFire Status

LAND-PAK™ User Guide – Rev. E 1-29 Table 1: Nautiz X7 Keypad Controls Ref. Key Description 1 Numeric Enter numbers1 2 Send Use for dialing or answ

Page 83

LAND-PAK™ User Guide – Rev. E 1-30  Refer to the Nautiz X7 Quick Start Guide for details on using this handheld device. Figure 4: Nautiz X7 Data Col

Page 84

LAND-PAK™ User Guide – Rev. E 1-31 Juniper Archer 2 Handheld Data Collector The Juniper Archer 2 high-speed handheld data collector features a 1.0GH

Page 85 - Set up StarFire Over IP

LAND-PAK™ User Guide – Rev. E 1-32 Figure 8: Archer 2 Data Collector Mating Connectors Figure 9: Archer 2 Mounted on the Pole Clamp  Refer to th

Page 86

LAND-PAK™ User Guide – Rev. E 1-33 Figure 10: Archer 2 Keypad, Detail Table 2: Archer 2 Keypad Controls Button Press and Release Shift Function

Page 87

LAND-PAK™ User Guide – Rev. E 1-34 Button Press and Release Shift Function 5 OK 5 Select OK on the screen 6 6 Right (varies by screen)  Return  T

Page 88

LAND-PAK™ User Guide – Rev. E 1-35 NavCom FieldGenius NavCom FieldGenius is designed for land surveying, civil engineering, seismic surveying, and

Page 89 - Auto connect to SFOIP

LAND-PAK™ User Guide – Rev. E 1-36 static work from recorded data. StarPoint is a complete desktop precise point positioning program created for surve

Page 90 - Reset RTK Filters

LAND-PAK™ User Guide – Rev. E 2-37 Chapter 2 ... Inventory Check This chapter provides the complete system inventory for LAND-P

Page 91

LAND-PAK™ User Guide – Rev. E ii WAAS (Wide Area Augmentation System) ... xviii EGNOS (European Geostationary Navigation Overlay Service)...

Page 92 - Setting Tolerances

LAND-PAK™ User Guide – Rev. E 2-38 Figure 11: LAND-PAK UHF Survey System Table 3: LAND-PAK UHF Survey System Contents (PN 92-310458-3001LF) Ref Ite

Page 93

LAND-PAK™ User Guide – Rev. E 2-39 Ref Item Qty Part Number hardware handshake, 6 ft 4 Li-Ion Battery, 7.4V, 2.6Ah 4 98-214946 5 Battery Charger, Du

Page 94

LAND-PAK™ User Guide – Rev. E 2-40 LAND-PAK GSM Network Rover Inventory Refer to Figure 12 for the items in the LAND-PAK GSM Network Rover inventory.

Page 95

LAND-PAK™ User Guide – Rev. E 2-41 Table 4: LAND-PAK Network Rover Parts List (PN 92-310459-3001LF) Ref Item Qty Part Number 1 SF-3040 Receiver 1 90

Page 96

LAND-PAK™ User Guide – Rev. E 2-42 Ref Item Qty Part Number 12 2-meter GPS Pocket Rod/Tape Measure 1 PH98223455 - MS CAD Basic Dongle (not shown) 1 98

Page 97

LAND-PAK™ User Guide – Rev. E 2-43 Chapter 3 ... Batteries This chapter provides guidance on battery charging for o

Page 98

LAND-PAK™ User Guide – Rev. E 3-44 Follow these steps to charge the receiver batteries: 1. Plug the supplied battery pack charger AC power adapter in

Page 99

LAND-PAK™ User Guide – Rev. E 3-45  Batteries are not charged in the unit. If external power is applied, the SF-3040 battery LEDs indicate the stat

Page 100

LAND-PAK™ User Guide – Rev. E 3-46 Follow these steps to install the battery packs: 1. Open the battery pack chamber (located on the left-hand side o

Page 101

LAND-PAK™ User Guide – Rev. E 3-47 Refer to the supplied SF-3040 GNSS Receiver Product User Guide for complete details on battery charging, instal

Page 102

LAND-PAK™ User Guide – Rev. E iii Chapter 5 Field Genius ... 65 Summary ...

Page 103

LAND-PAK™ User Guide – Rev. E 3-48 A 3.7V 5600mAh Lithium-Ion battery pack powers the Nautiz X7. It can provide approximately 8 to 12 hours of operati

Page 104

LAND-PAK™ User Guide – Rev. E 3-49 Figure 16: Battery Charger/Charging Cable

Page 106

LAND-PAK™ User Guide – Rev. E 4-51 Chapter 4 ... Function Test Setup This chapter provides a test setup of the LAND-PAK before field

Page 107

LAND-PAK™ User Guide – Rev. E 4-52 Figure 17: Windows Mobile Home Screen 4. Follow instructions to align pointer on the align screen. Touch and hol

Page 108 - Configuration

LAND-PAK™ User Guide – Rev. E 4-53 Figure 18: Windows Mobile Start Screen SF-3040 UHF Radio Modem Configuration This section provides steps to init

Page 109

LAND-PAK™ User Guide – Rev. E 4-54 via a com port and is not controlled via FieldGenius; see Appendix B for details. Licensing Requirements This radio

Page 110

LAND-PAK™ User Guide – Rev. E 4-55 Technical Specifications Table 7: UHF Radio Modem Specifications Item Receiver Transmitter Notes Operating Volta

Page 111 - -112 dBm

LAND-PAK™ User Guide – Rev. E 4-56 Item Receiver Transmitter Notes Power Consumption <1.2 W <3 W @ 0.5 W output power <7 W @ 1 W output pow

Page 112

LAND-PAK™ User Guide – Rev. E 4-57 Channel Spacing The data speed of the radio interface depends on the chosen radio channel spacing. Channel spacin

Page 113

LAND-PAK™ User Guide – Rev. E iv List of Figures Figure 1: SF-3040 Connectors, Detail... 25 Figure 2: Nautiz X7 Handheld Device ...

Page 114

LAND-PAK™ User Guide – Rev. E 4-58  High output power levels using short connection distances can, in the worst case, disturb the overall operation o

Page 115

LAND-PAK™ User Guide – Rev. E 4-59 Figure 20: Base Station Tripod – Leg Adjustments Figure 21: Base Station Tripod Refer to Figure 21 for the st

Page 116

LAND-PAK™ User Guide – Rev. E 4-60 5. Store the two Allen wrenches for future use as needed. Figure 22: Mounting Tribrach & Tribrach Adapter Re

Page 117

LAND-PAK™ User Guide – Rev. E 4-61 Rover Test Setup This section provides the steps to correctly and safely set up the rover. It is important to sel

Page 118

LAND-PAK™ User Guide – Rev. E 4-62 Figure 24: Mounting the MicroSurvey Nautiz X7 Refer to Figure 24 for the steps below: 3. Connect the clamp assem

Page 119

LAND-PAK™ User Guide – Rev. E 4-63 turning the top pole to align the spring-loaded clasps with the bottom pole. 6. Tighten the connector at the bas

Page 120

LAND-PAK™ User Guide – Rev. E 4-64 This page is left blank intentionally.

Page 121

LAND-PAK™ User Guide – Rev. E 5-65 Chapter 5 ... Field Genius This chapter provides details on installing and registering

Page 122

LAND-PAK™ User Guide – Rev. E 5-66 Installation NavCom’s FieldGenius software is included with the LANDPAK kit. This software can be loaded onto the

Page 123

LAND-PAK™ User Guide – Rev. E 5-67 Figure 27: End-User License Agreement 4. Click the Windows Mobile 6 box on the Device Selection box and click t

Page 124

LAND-PAK™ User Guide – Rev. E v Figure 33: Windows Mobile Today screen ... 69 Figure 34: FieldGenius Registration screen ... 70

Page 125

LAND-PAK™ User Guide – Rev. E 5-68 7. When the Application Downloading Complete prompt appears, click the OK button. Figure 30: Application Download

Page 126

LAND-PAK™ User Guide – Rev. E 5-69 Figure 32: FieldGenius CAB Installed Screen 10. Click the windows icon to access the Today screen. 11. Scroll do

Page 127 - C-125

LAND-PAK™ User Guide – Rev. E 5-70 Registration NavCom’s FieldGenius software opens in Demo mode. In order to take advantage of all the features, it

Page 128

LAND-PAK™ User Guide – Rev. E 5-71 Figure 35: MicroSurvey License Maintenance screen 5. Enter your Device ID from the FieldGenius registration scr

Page 129 - C-127

LAND-PAK™ User Guide – Rev. E 5-72 Figure 37: Keypad 8. Enter the first four characters of the password and click OK. Enter the next four character

Page 130

LAND-PAK™ User Guide – Rev. E 5-73 Figure 38: FieldGenius Registration Key Screen 9. When all the fields are filled in, click the Apply Key button

Page 131 - D-129

LAND-PAK™ User Guide – Rev. E 5-74  If the Invalid Key prompt appears, re-enter the password again. If it persists, contact Customer Service. SF-304

Page 132

LAND-PAK™ User Guide – Rev. E 5-75 Configure the Internal Radio as the Data Collector Perform these steps to configure the LAND-PAK 1W internal ra

Page 133 - D-131

LAND-PAK™ User Guide – Rev. E 5-76 3. Click Connect to connect to the SF-3040. 4. On the Link Configure dialog box (refer to Figure 41), select Inte

Page 134

LAND-PAK™ User Guide – Rev. E 5-77 Figure 42: Radio Setup 9. On the Link Configure dialog box (refer to Figure 41), set the RTK correction format

Page 135 - D-133

LAND-PAK™ User Guide – Rev. E vi Figure 67: Next Digit ... 111 Figure 68: Set Frequency ...

Page 136

LAND-PAK™ User Guide – Rev. E 5-78 2. On the Instrument Selection dialog box (refer to Figure 40), select GNSS Rover. 3. Click Connect to connect to

Page 137 - D-135

LAND-PAK™ User Guide – Rev. E 5-79 Figure 43: Instrument Settings/StarFire QuickStart 8. On the Point Database screen (refer to Figure 44), select

Page 138

LAND-PAK™ User Guide – Rev. E 5-80 View StarFire Status Perform the following steps to check StarFire status: 1. Open FieldGenius and create a projec

Page 139 - D-137

LAND-PAK™ User Guide – Rev. E 5-81 Figure 46: StarFire Status Choose an Alternate StarFire Satellite After logging on to FieldGenius and selecting

Page 140

LAND-PAK™ User Guide – Rev. E 5-82 Figure 47: Instrument Settings/StarFire Setup Figure 48: StarFire Setup/Source

Page 141

LAND-PAK™ User Guide – Rev. E 5-83 13. Click the Source field in the General section of the StarFire Setup screen. 14. Select StarFire from the drop

Page 142

LAND-PAK™ User Guide – Rev. E 5-84 6. On the Map page, Click the tools icon . 7. On the Instrument Settings dialog (refer to Figure 53), click Star

Page 143 - 92-310441-3001LF

LAND-PAK™ User Guide – Rev. E 5-85 Figure 50: StarFire Setup/StarFire Over IP 10. In the Source field, make sure that StarFire is selected. 11. I

Page 144

LAND-PAK™ User Guide – Rev. E 5-86 Figure 51: StarFire Setup/Mountpoint Selection 12. Select a Mountpoint from the Mountpoint dropdown list. Four M

Page 145

LAND-PAK™ User Guide – Rev. E 5-87 14. Allow the StarFire Over IP setup to complete the configuration. Auto connect to SFOIP This configuration dire

Page 146

LAND-PAK™ User Guide – Rev. E vii List of Tables Table 1: Nautiz X7 Keypad Controls ... 29 Table 2: Archer 2 Keypad Controls ...

Page 147

LAND-PAK™ User Guide – Rev. E 5-88 Reset RTK Filters This feature is used to reset the Kalman filter and ambiguity resolution process when RTK perform

Page 148 - RoHS 认证

LAND-PAK™ User Guide – Rev. E 5-89 Figure 53: Instrument Settings/Reset RTK Filters

Page 149 - 表17: 按部件号列出的有毒或危险物质或原件

LAND-PAK™ User Guide – Rev. E 5-90 Setting Tolerances Set the tolerance for all possible modes of operation. Regardless of the user selection, StarFir

Page 150

LAND-PAK™ User Guide – Rev. E 5-91 Accuracy (V) + 5mm +0.5ppm Rapid Static Post Processing Mode: Multi-frequency; L1/L2/L2C/L5/G1/G2 Accuracy (H) A

Page 151 - E-149

LAND-PAK™ User Guide – Rev. E 5-92 If the above conditions are met, then the receiver will not need to be put into RTK-WL mode.  RTK Extend uses Star

Page 152

LAND-PAK™ User Guide – Rev. E 5-93 StarFire Tolerance Perform these steps to set the StarFire tolerance parameters: 1. Open FieldGenius and select

Page 153 - E-151

LAND-PAK™ User Guide – Rev. E 5-94 Figure 54: GNSS Profile/Tolerance Setting [StarFire] Figure 55: Tolerance 1/StarFire

Page 154

LAND-PAK™ User Guide – Rev. E 5-95 RTK-X Tolerance The receiver must have attained an RTK fix and have tracked StarFire Dual mode before an RTK-X po

Page 155 - E-153

LAND-PAK™ User Guide – Rev. E 5-96 Figure 56: GNSS Profile/Tolerance Setting [RTK-X] Figure 57: Tolerance 2/RTK Extend

Page 156 -  “O” 表示本部件中所有均匀物质中的有毒物质或

LAND-PAK™ User Guide – Rev. E 5-97 When setting the above parameters, keep the selection RTK-X on the Solution drop-down list box.

Comments to this Manuals

No comments